HOW TO INSTALL AN UNDERGROUND SPRINKLER SYSTEM

There is a huge advantage in having an underground sprinkler system in your yard rather than having the old version of a sprinkler that you must drag around every day and apparently, you will be able to the job yourself and in that way you will be able to save so much money rather than hiring someone who will install the thing for lawn irrigation just like the lawn irrigation Brampton. And you can even schedule your own irrigation to water your lawn in whatever time that you want each day and how long until it ends.

SPRINKLER SYSTEM

Here are some steps on how to install your own sprinkler system in your own yard, look through our list and you will surely be able to install it by your own hands.

For you to be able to do this proves then you must measure the pressure of the water at any outdoor faucet that you have and use a normal pressure gauge. You must also measure how much water can the faucet produce in one minute and you can simply use any big bucket to catch the water. After which, you are going to send the information that you have gathered including the drawing of the positioning of your yard.  Then you will be receiving their layout of the system that is most appropriate for your yard and your measurements. This layout will provide you information on how you can possibly divide your lawn in a smart way and some companies will give this to you for free but you need to buy something from their shop just to get this for free.  You can rent some materials if ever you will find something that you find difficult in installing. You can rent these things for a very affordable price depending on where you are renting it from.  You can also do further research on what equipments you can use in order to make the process more easy and in this way, you can also find some techniques that will let you do the job more fast.

If you are going to do all the digging work yourself, then you must dig the main ones first. Six inches deep will be fine but you can stretch it up to nine inches so that you will be having enough room to fit the pipes. You must also put the valves above the grounds of your yard and then you should be cementing it to the pipe in the underground. Also, install the plastic that fits on the downstream of the sides of the valve and connect all of those wires.

The last step is threading the brass drain to fit into the threaded part of the PVC tee and you must be installing it on a downward position in fourty-five degrees. 

This is very easy to do and you can just do it by yourself and by renting some equipments to make your job easier plus you will saving enough money if you do it on your own.

Leave a Reply

Your email address will not be published. Required fields are marked *